Yamaha NP-S303 Manual De Instrucciones página 45

Bluetooth
This menu enables you to configure the Bluetooth settings of the unit.
❑
On/Off
Enables or disables the Bluetooth function.
Off Disables the Bluetooth function.
Enables the Bluetooth function. Immediately after selecting "On", the audio
On (default)
output from the network will pause momentarily.
❑
Standby (Bluetooth Standby)
Enables or disables the function that turns on the power to the unit from Bluetooth
devices. If this function is set to "On", the unit will automatically turn on when you
operate a Bluetooth-connected device.
Off Disables the Bluetooth Standby function.
On (default) Enables the Bluetooth Standby function.
NOTE
• This setting is not available when "Standby (Network Standby)" (page 44) is set to "Off".
AutoPowerStby (Auto Power Standby)
This menu setting enables or disables the Auto Power Standby function. If you select
"On", the unit will automatically enter standby mode if you do not operate the unit or
play any file for the specified time.
Off Disables the Auto Power Standby function.
Enables the Auto Power Standby function. The unit will automatically enter
standby mode if you do not play audio or operate the unit for 20 minutes.
On
Also, the unit (with any source selected) will automatically enter standby mode if
you leave it unoperated for 8 hours.
Default
U.K. and Europe models: On
Other models: Off
NOTE
• Immediately before the unit automatically enters standby mode, "AutoPowerStby" will appear on the
display along with the number of seconds it takes until standby mode kicks in.
45
En