INFORMATION
ABOUT
DEMOLITION
If the machine is to be scrapped, remove
all electrical, electronic, plastic and metal
parts
and dispose of them separately in accord-
ance with current provisions as prescribed
by law.
ENVIRONMENTAL
INFORMATION
The disposal procedure described below
only applies to machines with the symbol
of the waste bin with a bar across it
on their data plates.
This product may contain substances that
can be hazardous to the environment and
to human health if it is not disposed of
properly.
We are therefore providing you with the
information below in order to prevent these
substances from being released into the
environment, and to improve the use of
natural resources.
Electrical and electronic equipment must
never be disposed of in the usual municipal
waste but must be separately collected for
their proper treatment.
The crossed-out bin symbol, placed on
the product and on this page, reminds the
user that the product must be disposed of
properly at the end of its life.
Thus, the hazardous consequences that
non-specific treatments of the substances
contained in these products, or improper
use of parts of them, may have on the
environment or on human health are pre-
vented. Furthermore, this helps to recover,
recycle and reuse many of the materials
User manual ProLine 640
contained in these products.
Electrical and electronic manufacturers
and distributors set up proper collection
and treatment systems for these products
for this purpose.
At the end of the product's working life,
contact your supplier for information about
disposal procedures.
When you purchase this product, your
supplier will also inform you that you may
return another worn-out appliance to him
free of charge, provided it is of the same
type and has provided the same functions
as the product just purchased.
Any disposal of the product performed
in a different way from that described
above will be liable to the penalties pro-
vided for by the national regulations in
force in the country where the product is
disposed of.
Further measures for environmental pro-
tection are recommended: recycling of the
internal and external packaging of the prod-
uct and proper disposal of used batteries
(only if contained in the product).
Your help is crucial to reduce the amount
of natural resources used for manufactur-
ing electrical and electronic equipment,
minimise the use of landfills for product
disposal and improve the quality of
life, preventing potentially hazardous
substances from being released in the
environment.
UK
65