Information Regarding Machine Demolition; Environmental Information; Fire-Extinguishing Materials To Be Used - Corghi EM 9550 Plus Manual De Uso

ring nut, the centring cones and flange clean.
These components can be cleaned using a brush
previously dripped in environmentally friendly
solvents.
Handle cones and flanges carefully so as to avoid
accidental dropping and subsequent damage that
would affect centring accuracy.
After use, store cones and flanges in a place where
they are suitably protected from dust and dirt.
If necessary, use ethyl alcohol to clean the dis-
play panel.
Perform the calibration procedure at least once
every six months.
INFORMATION REGARDING
MACHINE DEMOLITION
If the machine is to be scrapped, remove all electri-
cal, electronic, plastic and metal parts
and dispose of them separately in accordance with
current provisions as prescribed by law.
ENVIRONMENTAL
INFORMATION
The following disposal procedure shall be exclu-
sively applied to the machines having the crossed-
out bin symbol on their data plate
This product may contain substances that can
be hazardous to the environment and to human
health if it is not disposed of properly.
The following information is therefore provided
to prevent the release of these substances and to
improve the use of natural resources.
Electrical and electronic equipment must never be
disposed of in the usual municipal waste but must
be separately collected for their proper treatment.
The crossed-out bin symbol, placed on the product
and on this page, reminds the user that the product
must be disposed of properly at the end of its life.
In this way it is possible to prevent that a non
specific treatment of the substances contained
in these products, or their improper use, or im-
proper use of their parts may be hazardous to the
environment or to human health. Furthermore, this
helps to recover, recycle and reuse many of the
materials contained in these products.
Electrical and electronic manufacturers and dis-
tributors set up proper collection and treatment
EM 9550 Plus - EM 9550 C Plus - Operator's manual
systems for these products for this purpose.
Contact your local distributor to obtain information
on the collection procedures at the end of the life
of your product.
When purchasing this product, your distributor will
also inform you of the possibility to return another
end-of-life piece of equipment free of charge as
long as it is of equivalent type and had the same
functions as the purchased product.
Any disposal of the product performed in a differ-
ent way from that described above will be liable to
the penalties provided for by the national regula-
tions in force in the country where the product is
disposed of.
Further measures for environmental protection
are recommended: recycling of the internal and
external packaging of the product and proper
disposal of used batteries (only if contained in
the product).
Your help is crucial in reducing the amount of natural
resources used for manufacturing electrical and
electronic equipment, minimise the use of landfills
for product disposal and improve the quality of
life, preventing potentially hazardous substances
from being released in the environment.
.
FIRE-EXTINGUISHING
MATERIALS TO BE USED
Consult the following table to choose the most
suitable fire extinguisher.
Dry materials
Water
Foam
Powder
CO2
Flammable liquids
Water
Foam
Powder
CO2
Electrical equipment
Water
Foam
Powder
CO2
YES* * Use only if more appropriate extinguishers
are not at hand and when the fire is small.
UK
YES
YES
YES*
YES*
NO
YES
YES
YES
NO
NO
YES
YES
75