Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT SAFETY
INSTRUCTIONS
Your sewing machine is designed and constructed only for HOUSEHOLD
use.
Read all instruction before using this sewing machine.
DA NG E R -To reduce the risk o felectric shock:
!.
An appliance
should never be left unattended
when plugged
in. Always
unplug this appliance
from the electric
outlet immediately
after using
and before cleaning,
2. Always
unplug
before relamping.
Replace
bulb with same type rated
15 Watts.
3. Do not reach
for the appliance
that has fallen
into water.
Unplug
immediately
4. Do not place or store appliance
where it can tall or be pulled into a tub
or sink. Do not place in or drop into water or other liquid.
WA RN ING
--To reduce the risk of burns, fire, electric shock,
or injury to persons.
1. Do not atlow to be used as a toy. Close attention is necessary when this
appliance is used by or near children.
2. Use this appliance only for its intended use as described Jn this manual.
Use only attachments
recommended
by the manufacturer
as contained in
this manual.
3.
Never operate this appliance if it has a damaged cord or plug, if it is not
working
properly,
if it has been dropped
or damaged,
or dropped
into
water. Return the appliance
to the nearest authorized
dealer or service
center for examination,
repair, electrical or mechanical adjustment.
4.
Never
operate
the appliance
with any air opening
blocked.
Keep
ventilation openings oi the sewing machine and loot controller tree from
accumulation
of lint, dust, and loose cloth.
5.
Never drop or insert any object into any opening.
6.
Do not use outdoors,
7.
Do not operate where aerosol (spray) products are being used or where
oxygen is being administered.
8.
To disconnect,
turn all controls to the off (-O")
position, then remove
plug from outlet.
9.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the
cord.
10.
11.
Keep fingers
away from all moving parts.
Special
care ts required
around the sewing machine need]e_
Always
use the proper needle plate, The wrong plate can cause the
needle to break.
12.
Do not use bent
needles.
13.
14.
Do not pull or push labric while stitching.
It may deflect the needle causing it to break.
Switch the sewing machine off (*'O °') when making any adiustment
in
the needle area, such as threading
needle, changing
needle, threading
bobbin, or changing presser loot, and the like.
15. Always
unplug
the sewing
machine
from the electrical
outlet
when
removing
covers, lubricating,
or when making any other adjustments
mentioned in the instruction manual.
SAVE THESE INSTRUCTIONS
Publicidad
Tabla de contenido
