Technical Specification - miniland baby digital basic Manual De Instrucciones

Problem
The power LED (4 or 11)
does not light up when
connecting the unit to
the mains.
Batteries cannot be
charged.
6. MAINTENANCE
Clean the equipment with a dry and soft cloth. Never use cleaning agents
or solvents.

7. TECHNICAL SPECIFICATION

- Frequency: 1,8 GHz
- Range: Up to 300 m under optimum conditions. It is possible to reach up to
50 m in buildings (as a result of walls, doors etc.)
- Baby unit (emitter):
· Adaptor: Input: 100~240 V AC, 50/60 Hz, 150 mA. Output: 7 V DC, 420 mA,
Centre = +
- Parent unit (receiver):
· Batteries: 2 x AAA 1.2V 450mAh Ni-MH (included)
· Adaptor: Input: 100~240 V AC, 50/60 Hz, 150 mA. (hard wired) Output:
7 V DC, 420 mA
- Transmitting power:
· Average: 10 mW
· Maximum: 250 mW
Possible Cause – things to do/check
· Check whether there is a power failure. Check
whether all connections are ok and both units
are switched on (on/off key, 1 or 9).
· AC/DC adaptor has not been connected: plug
the mains adaptor into a mains power socket.
· Non-rechargeable batteries have been used,
only special batteries can be recharged
(2 x AAA 1.2V 450mAh Ni-MH): please check
the batteries type and change them for the
provided ones.