Roland EDIROL UM-3EX Manual Del Usuario página 17

12.
Operation of the UM-3EX
13.
Operation of the UM-3EX
14.
Operation of the UM-3EX
A message of "Found New Hardware" will appear. Please wait.
* This unit is equipped with a protection circuit. A brief interval (a few seconds) after connecting the UM-3EX is
required before the unit will operate normally.
Windows XP users:
1. The Found New Hardware Wizard dialog box will appear.
If the message "Connect to Windows Update to search for software?" appears, choose "No"
and then click [Next].
2. Make sure that "EDIROL UM-3" is indicated. Then, choose "Install the software automatically
(Recommended)" and click [Next].
* If "Driver Signing Options" in step 4 is set to anything other than "Ignore," a dialog box with
an "!" symbol will appear. Click [Continue Anyway] to proceed with the installation.
Windows 2000 users:
If "Driver Signing Options" in step 4 is set to anything other than "Ignore," a dialog box
indicating "Digital Signature Not Found" will appear. Click [Yes] to proceed with the
installation.
15. The Completing the Found New Hardware Wizard dialog box will appear.
Click [Finish].
16. In the Driver Setup dialog box, click [Close].
If the Change System Settings dialog box appears, click [Yes]. Windows will restart automatically.
* If you changed the "Driver Signing Options" setting in step 4, restore the original settings after Windows
has restarted.
This completes driver installation.
Next, in order to ensure that MIDI processing occurs smoothly, you need to make settings so that
Background Services is given priority.
(➔ "Giving priority to Background Services" (p. 18))
Set the UM-3EX's MODE select switch to MASTER.
Set the UM-3EX's UNIT number select switch to 1.
Connect only one UM-3EX to your computer.
17