Tabla De Contenido; Table Of Specifications - Gumotex FRAMURA Manual De Usuario

kayak FrAMUrA
User's Manual
•
A recreational vessel designed for use on internal waterways with an expected wind strength reaching Grade
4 on the Beaufort Scale inclusive and a determining wave height of up to 0.3 metres inclusive, with occasional
waves up to 0.5 metres of height caused e.g. by vessels passing by.
•
The boat has been manufactured in compliance with the EN ISO 6185-1 Standard, Category IIIB.
•
Related standards: EN ISO 10087, EN ISO 10240, EN ISO 14945.
Dear Customer,
This manual will help you to easily and safely master your vessel.
It contains a detailed description of the vessel, the supplied or built-in
equipment, its sets as well as information about its control and mainte-
nance. Please read it carefully, thereby getting to know the boat before
actually using it.
If this is your first vessel or you have changed the type of vessel and
do not know this type well, please get acquainted with its maintenance
and control prior to your first individual use of the vessel so that it is safe
and comfortable.
Your dealer or the National Yacht Federation or club will recommend you
appropriate training courses or qualified instructors.
Do not pull off until the expected sailing conditions (wind strength and
wave height) are appropriate for the construction category of your vessel
and you and your crew are able to control it in these conditions.
Please store this manual in a safe place and hand it over to the new
owner should you sell the vessel.

1. table of specifications

(indicative values)
Length (cm)
Width (cm)
Diameter of sidewall cylinders (cm)
Number of air chambers
Dimensions of the folded product (cm)
Dimensions - packed in cardboard (cm)
Maximum operational pressure
Weight (kg)
Maximum load (kg)
Maximum number of kayakers
Draught (cm)
Highest anchor above surface (cm)
2. technical Description - see Picture 1
1. Side tube
2. Bottom
3. PUSH/PUSH valve - enables inflation/deflation, pressure
control, and pressure measurement by a pressure gauge
(placed below the top part of the boat)
4. Pressure-relief valve (placed below the top part of the boat)
5. Inflatable seat with back-rest
6. Foot-rest (placed below the top of the boat)
7. Plastic handle
8. Manufacturer's label (on the tube)
9. Yellow "WARNING" label
10. Bungee netting
11. Black zip with slider
8
table Of cONteNts:
1. Table of Specifications
2. Technical Description
3. Inflation Instructions
4. Using the boat
5. Folding of the boat
6. Treatment and Storage
7. Guarantee Conditions
8. Boat Repairing
9. Product Disposal Method
10. Packaging Disposal Method
11. Type Parameters Tag
12. Safety Caution
70 × 47,5 × 32
0,02 MPa [0,2 Bar / 3 PSI]
12. Anchor for foot-rest attachment (detail A)
13. Anchor for the rest on the tube (detail B)
14. Anchor for the seat on the bottom (Detail B)
15. Seat mounting strap (Detail B)
16. Reinforcement attachment (placed below the top part of
the boat)
17. Skeg-fin attachment
18. Kayak metal reinforcement
19. Elastic rope for fixing baggage
20. Drainage hole
21. Safety rope tie-down
22. Safety rope
23. Plastic reinforcement
24. Collar tunnel
25. Handle (on the tube)
VERSION 8/2020
GB
FRAMURA
410
75
27 × 16
3 + 1 + 1
68 × 40 × 30
16
180
1
15
40
page 8
8
9
9
9
10
10
10
10
10
10
11