Transport; Transporting The Wheelchair; Seat In Disabled Vehicle; Maintenance Tips For Users - B+B BX 11 Manual De Instrucciones

Ocultar thumbs Ver también para BX 11:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

BX 11
| Active wheelchair

7. Transport

7.1. Transporting the wheelchair

To transport the wheelchair as convenient as possible, all detachable
parts (footrests, wheels, accessories) must be removed and the wheelchair
folded.

7.2. Seat in disabled vehicle

You can determine whether or not your wheelchair is approved for use
as a seat in a vehicle for transporting disabled people by referring to
the symbols on the CE sticker on the product:
A
Wheelchair suitable for use as a seat in a vehicle for
A: Suitable as seat in disa-
transporting disabled people (fig. A)
bled vehicle
Wheelchair not suitable for use as a seat in a vehicle for
transporting disabled people (fig. B)
The wheelchair has also been marked with symbols on the frame which
quickly show you and your transport service provider if it is suitable for
transport in wheelchair accessible vehicles and where the fastening
points are located:
Wheelchair not suitable for use as a seat in a vehicle for
transporting disabled people (fig. C)
B
Fixation points on the restraint system (fig. D)
All products approved by B+B for use as seats in vehicles are tested
in accordance with ISO 7176-19. The tests in accordance with ISO
7176-19 were performed using restraint systems from AMF-Bruns. The
correct mounting of the restraint system is a prerequisite for the safe
transportation of the products in a vehicle for transporting disabled
people and the basis for the approval.
The restraint systems from AMF-Bruns provide the ideal points for the
C
provision of restraint force for the purpose of securing the products in
the vehicle for transporting disabled people (known by the German
B, C: Not suitable as seat
term „Kraftknoten", which is defined in the standard DIN 75078-2).
in disabled vehicle
For the purpose of providing restraint in the vehicle for transporting
disabled people (fig. D), the products must only be secured at these
72
specific points („Kraftknoten" points). If possible, use a permanently
installed car seat and its belt system. Stow the wheelchair in the
luggage space. The person responsible for the transportation should be
familiar with the current regulations for transportation as well as with
the method of operating the vehicle for transporting disabled people
and the restraint system.

8. Maintenance tips for users

8.1. Cleaning and disinfection

The frame and the paneling of the wheelchair can be cleaned with
a moist cloth. You can use a mild detergent for more stubborn dirt
The wheels can be cleaned with a wet synthetic fiber brush (do not
use a wire brush!)
Push handles, arm pads, and seat and back pads can be washed
off. Use mild detergent.
Use a disinfectant listed by VAH for disinfection.
Observe our included overview of the most important care, hygiene and
maintenance work.

8.2. Check before use

8.2.1. Brake Inspection

Make sure your brakes are operating properly before each use.
It should not be possible to push the wheelchair away while the
brakes are activated.
The wheelchair should be easy to drive without grinding noises and
with good direction stability when the brakes are released.
If you notice unusual behaviour when braking, inform your
qualified mobility dealer immediately and do not use the
wheelchair.
Bischoff & Bischoff GmbH | 01.06.2019
BX 11
Active wheelchair |
D
D: Fixing point restraint
system
73

Publicidad

Tabla de contenido
loading

Tabla de contenido