Setting The Date/Time - HealthSmart Premium Serie Manual De Instrucciones

SETTING THE DATE / TIME
Select the appropriate user bank.
1. When the unit is OFF, press the SET button to enter into the
user mode. The User 1 symbol will begin to flash, Fig. 1.
2. Press the MEMORY button to select User 1 or User 2 and
move into the date/time setting. Press SET to confirm.
NOTE: Setting the date / time for User 1 will automatically keep
the same date / time for User 2.
Setting the Date / Time
3. The year will begin to flash Fig. 2.
4. Press the MEMORY button to change until the desired
number appears.
NOTE: To scroll through the numbers quicker, hold down the
MEMORY button.
5. Press SET to confirm.
6. The date followed by the hour and minutes will blink.
Repeat steps 4 and 5 to adjust the date/time setting.
7. After setting the minutes, select the desired date format
by pressing the MEMORY button to switch between
"US" for standard date and 12-hour
formatting or "EU" for standard European
date and 24-hour formatting, Fig. 3.
8. Press SET to confirm.
NOTE: You will now automatically enter into the
Voice Setting and Volume Control mode. Please
see page 14 to continue the setup.
/
13
Fig. 1
/
Fig. 2
/
Fig. 3