dirna Bergstrom green Serie Manual Del Usuario página 10

COMPACT 1.4
EN
How to deactivate remote control:
In order to deactivate remote control, push key
play. Once it stops flashing, push key
or else you will have to repeat the whole operation.
Equipment switching on
In order to switch on Compact, push the On/off key
F4
(Automatic Function). To change function, push the On/off key
functions will be displayed one by one. Release key when desired function is reached. The
first time equipment is switched on, it will be initiated with the pre-established parameters.
Function
F0
Selecting F0 in the display shows the selected temperature and allows the user to
choose the comfort temperature which will be displayed from 15ºC to 27ºC or 59ºF
to 71ºF and to vary the unit's centrifugal blower speed (5 speeds indicated with the
characters V1 to V5 ).
Comfort temperature can be controlled by briefly pressing the keys
control panel or
The centrifugal blower speeds will be controlled by keeping the
control panel pressed down or from
V1 , V2 , V3 , V4 , V5 . The display shows the degrees selected when the unit is running.
Function F1 - Digital thermometer function
By selecting this function, Compact displays temperature inside cabin.
Function F2 - Time programming function
F2
programs the equipment so that it is automatically disconnected during a 1-9 hour period.
In order to program, push the On/off key
time using the keys
on panel. You will have to do it within 30 seconds
- Manual operation
remote control.
on the remote control, with the display showing
and confirm by pushing On/off
10
of control panel until
. Equipment always starts on function
F2
until is shown on display, select functioning
.
®
C
, flashes on dis-
and the various
. of the
keys of the