Maintenance And Care; Accessories, Tools; Disposal - Festool LS 130 EQ Manual De Instrucciones

Maintenance and care

Any maintenance or repair work
requiring the motor housing to be opened may only
be carried out by an authorised service workshop.
Maintenance or repair work carried out by an unau-
thorised person can lead to the wrong connection of
the power leads or other components, which in turn
can lead to accidents with serious consequences.
Always remove the plug from the
mains supply socket before carrying out any work
on the machine!
Always keep the machine and the ventilation slots
clean.
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at: www.festoolusa.com/
service
Use only original Festool spare
EKAT
4
parts! Order No. at:
www.festoolusa.com/service
5
3
2
1
The machine is fi tted with special carbon brushes
with automatic-switch-off. When the brushes reach
their wear limit the current is interrupted automati-
cally and the router comes to a standstill.

Accessories, tools

For safety reasons, only use
original Festool accessories and tools!
The accessory and tool order number can be found
in the Festool catalogue or on the Internet under
www.festoolusa.com.
Systainer
Many Festool products are shipped in a unique
system container, called "Systainer".
This provides protection and storage for the tool and
accessories. The Systainers are stackable and can
be connected together. They also can be conntected
atop Festool CT dust extractors.
To open the Systainer:
– Turn the T-loc [4.1] to the position
To lock the Systainer:
– Turn the T-loc [4.1] to the position
To connect two Systainers:
– Place one Systainer on the top of the other
(Fig. 4 A).
– Turn the T-loc [4.1] to the position
(Fig. .4 B).
The Systainers are connected and locked.
 A new generation Systainer is connectable on
top of a previous generation Systainer by the four
latches of the previous Systainer.
A
B
4.1
Do not throw the power tool in your household
waste! Dispose of machines, accessories and pack-
aging at an environmentally-responsible recycling
. centre. Observe the valid national regulations.
.
8

Disposal

or
4