Maintenance And Care; Accessories, Tools; Systainer - Festool RTS 400 EQ Manual De Instrucciones

A
B 6.1
• rubbing down or removing excess lime paste
with sanding vlies
2 - 3
• interim paint sanding on stained surfaces
• cleaning natural wood window grooves with
sanding felt
1 - 2
• sanding stained edges
• sanding thermoplastic synthetics

Maintenance and care

mains supply socket before carrying out any work
on the machine!
The cooling air vents on the motor housing must
always be free of blockages and clean to ensure
air circulation.
Any maintenance or repair work requiring the mo-
tor housing to be opened may only be carried out
6
by an authorised service workshop.

Accessories, tools

Festool accessories and tools!
The accessory and tool order number can be found
in the Festool catalog or on the Internet under www.
festoolusa.com.
Many Festool products are shipped in a unique
system container, called "Systainer". This provides
protection and storage for the tool and accessories.
The Systainers are stackable and can be interlocked
together. They also can be interlocked atop Festool
CT dust extractors.
To open the Systainer:
– Turn the T-loc [6.1] to the position
To lock the Systainer:
– Turn the T-loc [6.1] to the position
To connect two Systainers:
– Place one Systainer on the top of the other
(Fig. 6 A).
– Turn the T-loc [6.1] to the position
(Fig. 6 B).
8
Always remove the plug from the
For safety reasons, only use original

Systainer

.
.
or