Placing Tool In Service; How To Order A Screwdriver - Ingersoll Rand 41 Series Manual Del Usuario

LUBRICATION
Ingersoll–Rand No. 10
Always use an air line lubricator with these tools.
We recommend the following Filter–Lubricator–Regulator
Unit:
For USA –No. C05–02–G00
After each 40 000 cycles or each month, whichever
occurs first, lubricate the gear train with Ingersoll–Rand
No. 105 Grease.
After each 50 000 cycles or each month, whichever
occurs first, lubricate the clutch assembly with
Ingersoll–Rand No. 105 Grease or Ingersoll–Rand No. 115
Grease.
CONFIGURATION
P = PISTOL
S = STRAIGHT
* Model numbers are limited to catalogued items only.

PLACING TOOL IN SERVICE

Ingersoll–Rand No. 105
Ingersoll–Rand No. 115

HOW TO ORDER A SCREWDRIVER

– MODEL CODING –
41 S
MODEL
CONFIGURATION
TYPE CLUTCH
CLUTCH
A = AUTO SHUT OFF
C = CUSHTION CLUTCH
P = POSITIVE JAW
D = DIRECT DRIVE
MAIN LINES 3 TIMES
AIR TOOL INLET SIZE
TO
AIR
SYSTEM
TO
AIR
TOOL
LUBRICATOR
REGULATOR
BRANCH LINE 2 TIMES
AIR TOOL INLET SIZE
DRAIN REGULARLY
C 8 PS Q4
DRIVE SIZE
TOOL ACTUATION
FREESPEED
FREE SPEED TOOL ACTUATION
25 = 2500 RPM PS = PUSH TO START
17 = 1700 RPM TS = TRIGGER START
10 = 1000 RPM LT = LEVER THROTTLE
8 = 800 RPM
3
FILTER
COMPRESSOR
(Dwg. TPD905–1)
DRIVE SIZE
Q4 = 1/4" Q.C.
(Dwg. TPD1500)