Bosch eShift Shimano Nexus Di2 Instrucciones De Servicio página 19

English – ​ 7
eShift with the Kiox on-board computer
With the NuVinci/enviolo gear shifting, the desired cadence
can be changed while riding using the operating unit.
To do this, press the select button and use the right-hand
button to navigate to the <eShift cadence> option. Then ad-
just the value using the + or – button on the operating unit.
Next time you open the <Settings> menu, the <eShift ca-
dence> option will immediately be displayed, as the last set-
ting on your on-board computer will have been saved. Kiox
does not support a manual switching mode.
Under <Calibration>, you can calibrate the continuously
variable transmission. Then follow the instructions on the
display.
In the event of an error, it may also be necessary to perform
calibration when riding. Confirm the calibration here too,
and follow the instructions on the display.
Bosch eBike Systems 0 275 007 XES | (29.05.2018)