Preset Tuning - Teac CR-H260i Manual Del Usuario

FM mode
When a stereo FM program is tuned in, you can select
between stereo and mono by pressing the FM MODE button.
Stereo
Stereo FM broadcasts are received in stereo and "Stereo"
appears on the display.
p If reception is poor, set the unit to receive in mono.
Mono
Stereo FM broadcasts are converted to mono. If reception of
an FM broadcast is poor, this mode will make the signal mono,
but it will also reduce noise and make it easier to listen to.

Preset tuning (1)

You can store presets for up to 30 FM and 15 AM stations.
Automatically setting station
presets
1
Select "TUNER FM" or "TUNER AM" by press-
ing the TUNER button.
2
Press and hold the PROGRAM button for
more than 3 seconds.
Stations will automatically be selected and assigned
presets in order.
39