Using The Timer - Teac CR-H260i Manual Del Usuario

p The unit can be programmed to turn on and off at spec-
ified times.
p Adjust the clock before setting the timer.
p If no action is taken for 20 seconds, timer setting will
end automatically.
p Use the cursor (l/;) buttons to move between setting
items.
1
Press the TIME MODE button.
The hour value of the start time blinks.
Start time
Stop time
2
Press the Scroll buttons (k/j) to set the
hour of the start time and press the ENTER
button.
The minute value of the start time blinks.
Start time
Stop time
46

Using the timer (1)

Playback source
Volume level
Playback source
Volume level
3
Press the Scroll buttons (k/j) to set the
minute of the start time and press the ENTER
button.
The hour value of the stop time blinks.
Start time
Stop time
4
Press the Scroll buttons (k/j) to set the
hour of the stop time and press the ENTER
button.
The minute value of the stop time blinks.
Start time
Stop time
Playback source
Volume level
Playback source
Volume level