Brushcutter Blade; Attaching Shoulder Harness/Strap; Before Operation; Oil And Fuel - Maruyama B42L Manual Del Propietário

Left-hand thread
Boss Adapter
Gearcase

Attaching Shoulder Harness/Strap

WARNING
POTENTIAL HAZARD
• Without the Shoulder Harness/Strap
Installed on the Trimmer/Brushcutter,
the blade can produce side thrust which
can expose the operator and bystanders
to blade contact.
WHAT CAN HAPPEN
• Contact with Br ushcutter blade can
cause severe personal injur y.
HOW TO AVOID THE HAZARD
• Never operate the Trimmer/Brushcutter
without installing and using the
Shoulder Harness/Strap.
[B42, B42A]
Snap the Hook into the ring on the drive shaft. To detach
the Harness quickly from the Trimmer/Brushcutter, push
the Red-Button.
Blade Bolt
Stabilizer
Washer

Brushcutter Blade

Holding Tool
(3,5mm Pin)
— US-15 —
Red Button
[B42L]
Snap the strap hook into the ring on the drive shaft.
To detach the strap quickly from the Brushcutter, pull
upward on the red band.
Red Band
Ring

Before Operation

Oil and Fuel

DANGER
POTENTIAL HAZARD
• In certain conditions gasoline is extreme-
ly flammable and highly explosive.
WHAT CAN HAPPEN
• A fire or explosion from gasoline can
burn you, others, and cause property
damage.
HOW TO AVOID THE HAZARD
• Use a funnel and fill the fuel tank out-
Strap