Battery Pack; Capacity Display; Settings - Festool HKC 55 EB Manual De Instrucciones

[1-5] Guide wedge
[1-6]
Pendulum guard
[1-7] On/Off switch
[1-8] Lever for plunge function
[1-9] Split scale for cutting depth stop
(with/without guide rail)
[1-10] Extractor connector
[1-11] Angle scale
[1-12] Knob for angle setting
[1-13] Cutting depth adjuster
[1-14] Capacity display button on battery
pack

[1-15] Capacity display

[1-16] Battery pack

[1-17] Button for releasing the battery pack
[1-18] Adjustable jaws
The pictures for the functional description are
on a fold-out page at the beginning of the in­
struction manual. While reading the manual
you can fold out the page for comparison and
quick reference.
Accessories shown or described are not always
included in the scope of delivery.
7 Battery pack
► Inserting the battery pack [2 B]
► Removing the battery pack [2 A]
1
7.1
The capacity display [1-15] indicates the charge
of the battery pack for approx. 2 seconds after
the button [1-14] is pressed:
Recommendation: Charge the battery pack
*
before any further use.
2 A
8
Risk of injury, electric shock
► Always disconnect the battery packs from
8.1
Smooth start-up
The electronically controlled smooth start-up
ensures that the machine starts up jolt-free.
2
Constant speed
The motor speed remains constant through
electronic control to ensure a uniform cutting
speed even when under load.
Capacity display
Further information about the battery
pack and charger can be found in the
corresponding operating manual.

Settings

WARNING
the machine before performing any type of
work on the machine!
Electronics
English
2 B
70‑100%
40‑70%
15‑40%
< 15%
*
13