Descargar Imprimir esta página

Dust Extraction; Working With The Electric Power Tool; Switch On/Off; Acoustic Warning Signal - Festool HKC 55 EB Manual De Instrucciones

Sierra circular de batería
Ocultar thumbs Ver también para HKC 55 EB:

Publicidad

Idiomas disponibles

Idiomas disponibles

English
8.7

Dust extraction

WARNING
Heath hazard posed by dust
► Always work with an extractor.
► Comply with national regulations.
Independent extraction
► Secure the connection piece [6-2] of the
dust collection bag [6-3] at the extractor
connector [6-1] with a clockwise rotation.
► To empty remove the connection piece [6-2]
of the dust collection bag from the extractor
connector [6-3] with an anti-clockwise rota­
tion [6-1].
Festool mobile dust extractor
A Festool mobile dust extractor with an extrac­
tor hose diameter of 1-1/16" (27 mm) or 1-7/16"
(36 mm) (36 mm recommended due to the re­
duced risk of clogging) can be connected to the
extractor connector [6-1]
The adapter on a suction hose Ø 27 mm is in­
serted into the angle adapter . The adapter on a
suction hose Ø 36 mm is inserted over the an­
gle adapter .
Static charge may occur if an anti-static suction
hose is not used. The user may suffer an elec­
tric shock.
16
6
6-1
6-2
6-3
9
Working with the electric
power tool
Please observe all mentioned safety in­
formations and the following rules when
working:
Only guide the power tool towards the
workpiece when it is switched on.
Before each use, check that the pendulum
guard is working correctly. Only use this
power tool when it is in perfect working or­
der.
Always secure the workpiece in such a
manner that it cannot move while being
processed.
Always hold the machine with two hands at
the handles [1-1] when performing work.
This reduces the risk of injury and is a pre­
requisite for precise work.
Always push the saw forwards [8-9], and
never towards yourself.
Adapt the infeed speed to prevent the cut­
ters on the saw blade from overheating and
prevent plastic materials from melting dur­
ing cutting.
Make sure that the knob [1-12] is tightened
before starting work.
9.1

Switch on/off

► Slide switch-on lock [1-2] upwards.
► Press the ON/OFF switch [1-7].
Press = ON
Release = OFF
9.2

Acoustic warning signal

Acoustic warning signals sound and the power
tool switches off in the following operating
states:
Battery flat or power tool overloaded:
peep
► Change the battery.
► Reduce the power tool load.
9.3

Sawing along the scribe mark

The cut indicators display the cutting sequence
without a guide rail:
0° cuts: [7-1]
45° cuts: [7-2]

Publicidad

loading