Emc Declaration; General Information; Electromagnetic Emissions - Dräger 8413417 Instrucciones De Uso

Weight
Dimensions (W x H x D)
Classification
As per EC directive 93/42/EEC Annex IX
UMDNS Code
Universal Medical Device Nomenclature System

EMC Declaration

General information

The EMC compliance of the medical device is also
applicable to the external cables, transducers, and
accessories specified in the list of accessories. In
addition, accessories which do not affect EMC
compliance may be used if no other reasons forbid
their use (see other sections of the Instructions for
Use). The use of non-compliant accessories may
result in increased emissions or decreased
immunity of the medical device.
The medical device may only be used adjacent to
or stacked with other devices when the
configuration is approved by Dräger. If adjacent or
stacked use of non-approved configurations is
inevitable, the medical device must be observed to
verify normal operation in the said configuration. In
any case, strictly observe the Instructions for Use of
the other devices.

Electromagnetic emissions

When using wireless networking, be aware that the
system operates at 2.4 GHz range. Other
equipment, even if compliant with CISPR emission
requirements, could interfere with reception of
wireless data. When selecting wireless systems
(wireless communication devices, pager systems,
etc.) for use in installations where wireless
networking is used, ensure that operating
frequencies are compatible. For example, selecting
wireless communication devices that operate at
Instructions for Use Air Compressor
approx. 45 kg (100 lbs)
approx. 50 x 38 x 41 cm (20 x 15 x 16 inches)
II a
10-971
2.4 GHz may cause difficulty with the networking
components. Low-level signals such as ECG are
particularly susceptible to interference from
electromagnetic energy. While the equipment
meets the testing described below, it will not ensure
perfect operation. The "quieter" the electrical
environment the better. In general, increasing the
distance between electrical devices decreases the
likelihood of interference.
Detailed radio frequency characteristics
Communication devices in accordance with
IEEE 802.11b:
– 2412 to 2472 MHz
– DSSS limited to 100 mW
– applicable to access points and client adapters
Communication devices in accordance with
IEEE 802.15.1:
– 2400 to 2485 MHz
– FHSS limited to 2.5 mW
See the documentation that accompanies the
wireless products for further details.
Electromagnetic environment
The medical device is intended for use in an
electromagnetic environment as specified below.
The user must ensure its use in such an
environment.
English / US English
33