Improper Use - WIKA DIH10 Manual De Instrucciones

3. Safety
It can be used especially where a standard signal of 4 ... 20 mA is
already available. The current-loop display is built into an appropriate
connection head and can thus be used as a local display in all sectors of
industry.
EN
This instrument is not permitted to be used in hazardous areas!
This is class A equipment for emissions and is intended for use in
industrial environments. In other environments, e.g. residential or
commercial installations, it can interfere with other equipment under
certain conditions. In such circumstances the operator is expected to
take the appropriate measures.
The instrument has been designed and built solely for the intended use
described here, and may only be used accordingly.
The technical specifications contained in these operating instructions
must be observed. Improper handling or operation of the instrument
outside of its technical specifications requires the instrument to be taken
out of service immediately and inspected by an authorised WIKA service
engineer.
The manufacturer shall not be liable for claims of any type based on
operation contrary to the intended use.

3.3 Improper use

WARNING!
Injuries through improper use
Improper use of the instrument can lead to hazardous
situations and injuries.
▶
▶
▶
8
Refrain from unauthorised modifications to the instrument.
Do not use the instrument within hazardous areas.
Do not use the instrument with abrasive or viscous media.
WIKA operating instructions model DIH10