Function Of Each Part; Start/Stop Button; Reverse Stitch Button; Needle Up-Down / Slow Button - Singer C430 Manual De Instrucciones

FUNCTION OF EACH PART

A. START/STOP BUTTON
The machine will start running when start/stop
button is pressed and will stop when pressed the
second time. The machine will rotate slowly at start
of sewing.
Note: When the foot control is connected, start/
stop button will be deactivated.
MONITOR LAMP
Green Light "ON"
Ready to sew or wind a bobbin.
Red Light "ON"
Presser foot is not in down position or buttonhole
lever is not lowered.
If the red light is on, the machine will not start even
when start/stop button is pressed.
If the upper thread is not threaded, the machine
will stop. (Upper thread sensor)
B. REVERSE STITCH BUTTON
The machine will continue to sew in reverse at low
speed while this button is pressed and stop when
this button is released.
Note: When the foot control is connected,
machine will sew in reverse while this button
is pressed. When released, machine will sew
forward.
C. NEEDLE UP-DOWN / SLOW BUTTON
Pressing this button when the machine is stopped,
will change the needle position from down to up or
from up to down.
While sewing, by pressing this button, machine
will sew in slow speed. Pressing this button again,
the speed will return.
D. SPEED CONTROL BUTTON
The machine will sew faster when the button is slid
to the right, and sew slower when the button is slid
to the left.
Note: When the foot control is connected, this
button limits the maximum speed.
E. PRESSER FOOT LIFTER
The presser foot is lifed up or down by this lever.
Note: Machine will not start when the presser foot
is lifted. (Except for bobbin winding)
24