Tabla de contenido
Publicidad
User's handbook
• Do not stand in the movement area of the door.
• Do not let children play with controls and near the door.
• Should operating faults occur, do not attempt to repair the fault but call a qualified technician.
To release the automatic system and proceed to the manual operation, it is sufficient to pull the knob P
downwards. To switch to the automatic mode again, push the level L towards the door and give an impulse
control for the opening and closing of the system.
If the height at which the system is fitted renders the level L difficult to reach, use another cord with knob.
• Every month check the good operation of the emergency manual release.
• It is mandatory not to carry out extraordinary maintenance or repairs as accidents may be caused.
operations must be carried out by qualified personnel only.
• The operator is maintenance free but it is necessary to check periodically if the safety devices and
other components of the automation system work properly. Wear and tear of some components could
cause dangers.
If the product must be dismantled, it must be disposed according to regulations in force regarding the diffe-
rentiated waste disposal and the recycling of components (metals, plastics, electric cables, etc..). For this
operation it is advisable to call your installer or a specialised company.
All Benincá products are covered by insurance policy for any possible damages to objects and persons
caused by construction faults under condition that the entire system be marked CE and only Benincá parts
be used.
Pull downward to carry out the manual opera-
tion.
Safety rules
Manual operation from the inside
Maintenance
Waste disposal
Warning
L
Pull to reset the automatic operat-
ing mode.
P
KTE
These
t h e
19
Publicidad
Tabla de contenido
