1. Introduc on
1.1 Safety
When not properly used the Meat Grinder can be poten ally DANGEROUS. Servicing,
cleaning or any other opera on shall be made by trained people.
The following instruc ons must be observed in order to avoid accidents:
1.1.1 Always unplug the machine when cleaning, servicing or when any other opera on is
needed.
1.1.2 Never use tools that do not belong to the machine during opera on.
1.1.3 Before switching the machine on check if the Head Nº01 (Pic.01) is firm in its posi on,
if all its internal components are assembled as well as if the Pan Nº04 (Pic.01) is mounted.
1.1.4 Never spray water or other liquid substances directly at motor, power switch or any
other electrical components.
1.1.5 Never use loosen clothes specially shirts with loosen sleeves during opera on.
1.1.6 Never put your fingers or any other object but the Stomper Nº05 (Pic.01) inside
feeding throat.
1.1.7 Keep hands off turning parts.
1.1.8 Never switch the machine on with wet clothes or wet shoes.
1.1.9 Before using the machine make sure it is properly grounded.
Your equipment is also protected against any eventual failure. Operator and motor's
integrity is maintained under this adverse condi on. This protec on is possible by means
of a thermal overload switch. In case your equipment suddenly stops wait for a few
minutes and press thermal overload switch bu on located at rear of machine.
This equipment shall not be used by persons (including children) having reduced
mental or physical capabili es, or having faulty experience or knowledge, unless
they have been previously supervised or instructed by a person responsible for the
equipment safety, about how to use it.
4
IMPORTANT
49