Menu Navigation Buttons; Program Buttons (Live Output); Preview Buttons (Preview Output) - Chauvet Professional VIP 5162 Signal Processor Manual Del Usuario

Menu Navigation
Buttons
Program Buttons
(Live Output)
Preview Buttons
(Preview Output)
VIP™ 5162 Signal Processor User Manual Rev. 1
Button
<ESC>
Exits from the current menu
<UP>
Moves up through menu options
<LEFT>
Moves left through values or options
<SEL>
Confirms the current selection
<RIGHT>
Moves right through values or options
<DOWN>
Moves down through menu options
The program buttons are used to select which input source goes to live output. There is 1 button for
each input source.
If one of these buttons is pressed, it immediately changes the live output.
Button
Directs input source 1 to live output—this button is labeled 1 because it is a
<1>
configurable input source.
Directs input source 2 to live output—this button is labeled 2 because it is a
<2>
configurable input source.
<DVI3>
Directs the DVI3 input source to live output.
<DVI4>
Directs the DVI4 input source to live output.
<VGA3>
Directs the VGA3 input source to live output.
<VGA4>
Directs the VGA4 input source to live output.
The buttons <1> and <2> can receive input from one of a few
corresponding input ports. The buttons <DVI3>, <DVI4>, <VGA3>, and
<VGA4> can only receive input from their single corresponding port.
See
The preview buttons are used to select which input source goes to preview output and which input
source will go to live output when the <TAKE> or <CUT> button is pressed. There is 1 button for
each input source.
If the one of buttons is pressed, it changes the preview output, but it does not change the live output
until the <TAKE> or <CUT> button is pressed.
Button
<1>
<2>
<DVI3>
<DVI4>
<VGA3>
<VGA4>
Input 1 Ports and Input 2
Directs input source 1 to preview output—this button is label 1 because it is
configurable input source.
Directs input source 2 to preview output —this button is label 2 because it is
configurable input source.
Directs the DVI3 input source to the preview output.
Directs the DVI4 input source to the preview output.
Directs the VGA3 input source to the preview output.
Directs the VGA4 input source to the preview output.
The buttons <1> and <2> can can receive input from one of a few
corresponding input ports. The buttons <DVI3>, <DVI4>, <VGA3>,
and <VGA4> can
corresponding port. See
3. Setup | Front Panel Buttons
Action
Action
Ports.
Action
only receive input
Input 1 Ports and Input 2
from their single
Ports.
Page 15 of 140