Fade; Wipe - Chauvet Professional VIP 5162 Signal Processor Manual Del Usuario

FADE

1st Level
TRANS MODE
FADE TIME

WIPE

1st Level 2nd Level
SETUP
WIPE
WIPE
MODE
HARD
SWITCH
WIPE
SPEED
SETUP
WIPE
WIPE
MODE
SOFT
SWITCH
WIPE
SPEED
WIPE BAR WIDTH
Page 26 of 140
2nd Level
FADE
Sets the transition mode to FADE (See FADE)
WIPE
Sets the transition mode to WIPE (See WIPE)
1–60
Sets the speed of the fade
3rd Level
WIPE RIGHT
WIPE LEFT
WIPE DOWN
WIPE UP
WIPE PLUS OUT
WIPE CURTAIN OUT
WIPE CENTER OUT
1–60
WIPE RIGHT
WIPE LEFT
WIPE DOWN
WIPE UP
WIPE PLUS OUT
WIPE CURTAIN OUT
WIPE CENTER OUT
1–60
Sets a hard edged wipe going in one of four directions across the image.
Sets a hard edged wipe that is a plus sign expanding from the center of the image.
Sets a hard edged wipe that closes in from either side of the image.
Sets a hard edged wipe that expands out from the center of the image.
Sets the speed of the wipe.
Sets a soft edged wipe going in one of four directions across the image.
Sets a soft edged wipe that is a plus sign expanding from the center of the image.
Sets a soft edged wipe that closes in from either side of the image.
Sets a soft edged wipe that expands out from the center of the image.
Sets the speed of the wipe.
Sets the width of the soft edge of the wipe.
4. Operation | Front Panel Configuration Buttons
Description
Description
VIP™ 5162 Signal Processor User Manual Rev. 1