Switch Mode Subtab; Switch Mode Subtab Options; Screenshot Of Switch Mode Sub-Tab - Chauvet Professional VIP 5162 Signal Processor Manual Del Usuario

Switch Mode
Subtab

Switch Mode Subtab Options

Item/Button
Output Format
Display Config Mode
Load Save
Screenshot of
Switch Mode Sub-
Tab
VIP™ 5162 Signal Processor User Manual Rev. 1
The Switch mode subtab is for setting the output resolution for the program screen, viewing the
current signal processor display configuration, and loading saved configurations. Switch mode
subtab is accessible only from the mode tab. It provides useful information during live operation of
the signal processor.
· Output format should not be changed during live operation of the signal processor
because it will cause the program screen to go black and flicker as it changes the format.
· Saved configurations should not be loaded during live operation of the signal processor.
Button/Section
920x1080
600x1200
1024x768
1280x1024
Sets the output resolution for the program screen. See
1440x900
1680x1050
1920x1280
Normal
Shows the current signal processor operating mode.
Split
PIP
Save1–Save10
Saves the current configuration to the signal processor. The processor can store up to 10
configurations.
Factory Reset will clear out all saved configurations.
4. Operation | Software Operation
Description
OUT RES.
Page 33 of 140