Work Safety Regulations - Nederman 920 Manual De Instrucciones

ENGLISH
GB

WORK SAFETY REGULATIONS

WARNING! Risk of personal injuries
and/or product damages.
• The system must not be used for other purposes than
extracting vehicle exhaust fumes.
• If the system is designed for use only with stationary
vehicles, the vehicle must not be moved when the hose
nozzle has been connected to the vehicle exhaust pipe.
• Always disconnect the nozzle from the exhaust pipe
before the vehicle is driven out of the garage.
• The system must not be used when working on the
vehicle´s fuel system, when recharging the batteries
or whenever there is a risk for inflammable dust or
explosive gases.
• When working with a running engine and specially
in a greasing pit a gas detector is recommended.
• Check that there is enough suction capacity in the
exhaust hose before it is connected to the vehicle's
exhaust pipe. If not, check the fan impeller rotation
direction and/or damper function. If necessary check
installation of fan start switch.
12
• Check that the nozzle is correctly fitted to the
exhaust pipe.
• Use a dust filter mask during service and repair
work inside the system (for example hose or nozzle).
• For systems with automatic disconnection the
maximum speed must not be more than 15 km/h.
• Check that the hose or nozzle will not snag on
any protruding parts on the vehicle or near
surroundings.
• Risk of burn injuries! When using the system for
a long time with high engine speed, avoid contact
with hot hose or nozzle.