Normas Consideradas; Certificaciones - WEG CFW501 Serie Manual Del Usuario

Especificaciones Técnicas

8.2.1 Normas Consideradas

NORMAS DE
SEGURIDAD
NORMAS DE
COMPATIBILIDAD
ELECTROMAGNÉTICA
NORMAS DE
CONSTRUCCIÓN
MECÁNICA

8.3 CERTIFICACIONES

(*)
Certificaciones
UL y cUL
CE
IRAM
C-Tick
84 | CFW501
Tabla 8.2: Normas consideradas
UL 508C - Power conversion equipment.
„
UL 840 - Insulation coordination including clearances and creepage distances
„
for electrical equipment.
EN 61800-5-1 - Safety requirements electrical, thermal and energy.
„
EN 50178 - Electronic equipment for use in power installations.
„
EN 60204-1 - Safety of machinery. Electrical equipment of machines. Part 1:
„
General requirements.
Nota: Para tener una máquina en conformidad co esa norma, el fabricante
de la máquina es responsable por la instalación de un dispositivo de parada de
emergencia y un equipamiento para seccionamiento de la red.
EN 60146 (IEC 146) - Semiconductor converters.
„
EN 61800-2 - Adjustable speed electrical power drive systems - Part 2: General
„
requirements - Rating specifications for low voltage adjustable frequency AC
power drive systems.
EN 61800-3 - Adjustable speed electrical power drive systems - Part 3: EMC
„
product standard including specific test methods.
EN 55011 - Limits and methods of measurement of radio disturbance
„
characteristics of industrial, scientific and medical (ISM) radio-frequency
equipment.
CISPR 11 - Industrial, scientific and medical (ISM) radio-frequency equipment -
„
Electromagnetic disturbance characteristics - Limits and methods of measurement.
EN 61000-4-2 - Electromagnetic compatibility (EMC) - Part 4: Testing and
„
measurement techniques - Section 2: Electrostatic discharge immunity test.
EN 61000-4-3 - Electromagnetic compatibility (EMC) - Part 4: Testing and
„
measurement techniques - Section 3: Radiated, radio-frequency, electromagnetic
field immunity test.
EN 61000-4-4 - Electromagnetic compatibility (EMC) - Part 4: Testing and
„
measurement techniques - Section 4: Electrical fast transient/burst immunity test.
EN 61000-4-5 - Electromagnetic compatibility (EMC) - Part 4: Testing and
„
measurement techniques - Section 5: Surge immunity test.
EN 61000-4-6 - Electromagnetic compatibility (EMC)- Part 4: Testing and
„
measurement techniques - Section 6: Immunity to conducted disturbances,
induced by radio- frequency fields.
EN 60529 - Degrees of protection provided by enclosures (IP code).
„
UL 50 - Enclosures for electrical equipment.
„
IEC60721-3-3 - Classification of environmental conditions - Part 3: Classification
„
of groups of environmental parameters and their severities - Section 3: Stationary
use at weatherprotected locations nivel 3m4.
Obervaciones
E184430