Control Connections - WEG CFW501 Serie Manual Del Usuario

Installation and Connection

3.2.5 Control Connections

The control connections (analog input/output, digital input/output and interface RS485)
must be performed according to the specification of the connector of the plug-in module
connected to the CFW501. Refer to the guide of the plug-in module in the package of the
product or in the CD manual of the product. The typical functions and connections for
the CFW500-CRS485 plug-in module are shown in figure 3.4. For further details about
the specifications of the connector signals, refer to chapter 8 - Technical Specifications.
+24 V
Figure 3.4 (a): Signals of the connector of the CFW500-CRS485 plug-in module
CFW501 | 17