SKYLOTEC LORY Instrucciones De Uso página 6

EN 358:1999 and EN 795:2012 Type B
Certified for use with Lanyard WP.
EN 12841:2006 Type C
Certified for use with low stretch (EN 1891 Type A) ropes with
diameters between 10 mm and 12 mm.
Diameter Maximum rated load
10 mm - 12 mm 225 kg
EN 15151-1 Type 8
Only the version LORY is subject to certification according to the
norm EN 15151-1. It is certified to be used with single dynamic
ropes (EN 892) of diameters between 8.9 mm and 11.4 mm and low
stretch ropes (EN 1891) of diameters between 9 mm and 12 mm.
Rope type Diameter
Single dynamic 8,9 mm through 11,4 mm
Low stretch 9 mm through 12 mm
ANSI/ASSE Z359.4-2013
Tests according to the norm ANSI/ASSE Z359.4-2013 have been
performed with the following models of lowstretch rope:
Static R44, 11,0 mm
Static Pro, 11,0 mm
Tested and approved for multiple descents with s released energy
of 5 500 000 foot- pounds. The descent energy rating is determined
by:
E = W x H x N
W: Test weight (lb)
H: Descent height (ft)
N: Number of descent
LORY PRO is a self-braking descender for single rope use and
is certified according to the norms EN 341:2011 Class A, EN
12841:2006 Type C, EN 358:1999, EN 795:2012 Type B and
ANSI/ASSE Z359.4:2013. While the first norm is meant for rescue
purposes only and the second implies rope access. The third is
meant for work positioning and restraint. The fourth norm covers
temporary anchor devices. The fifth norm applies to assisted-recue
and self-rescue systems in the USA. Additionally, only LORY is
certified according to the norm EN 15151-1:2012 as a belay device
with assisted locking.
6