Adding A Track Mark; Erasing A Track Mark - Sony MD WALKMAN MZ-R35 Manual De Instrucciones

Adding a track mark

You can add track marks so that the part
after the new track mark is counted as a
new track.
The track numbers will increase as
follows.
1 2
4
Track marking
.
1 2
Track numbers increase
1
While playing or pausing an MD,
press TRACK MARK on the recorder
at the point you want to mark.
"MARK ON" appears in the display,
and a track mark is added. The track
number will increase by one.
To add track marks while
recording
Press TRACK MARK on the recorder or the
remote control.
Note
TRACK MARK on the remote control does
not function during playback.
22
-EN
3 4
3 4 5
TRACK MARK

Erasing a track mark

When you record with analog (line) input,
unnecessary track marks may be recorded
where recording level is low. You can
erase a track mark to combine the tracks
before and after the track mark. The track
numbers will change as follows.
1 2
4
Erase a track mark
.
1 2
Track numbers decrease
= TRACK MARK
1
While playing the track with the track
mark you want to erase, press P to
pause.
2
Find the track mark by pressing =
slightly.
For example, to erase the third track
mark, find the beginning of the third
track. "00:00" appears in the display.
3
Press TRACK MARK to erase the
mark.
"MARK OFF" appears in the display.
The track mark is erased and the two
tracks are combined.
z
When you erase a track mark, the date, time,
and name assigned to the mark are also
erased.
3 4
3
P