General Safety Rules - S&P HTB-150 N IP55 Instrucciones De Uso

ENGLISH
Warning: Read all the instructions carefully to ensure the correct
installation and use of the equipment.
Neither the manufacturer, nor the distributor/agent, nor the shop where the
product was purchased will be responsible for any damage or loss caused
by incorrect installation of this product.

GENERAL SAFETY RULES

To ensure that the ceiling fan is safely installed, read the following general safety
rules before starting the installation.
1.-This fan must be installed by qualified personnel.
2.-To ensure the correct installation, carefully read the instructions manual and
study the drawings before starting installation.
3.-All the electrical connections should conform to the local and national
regulations in force.
4.-Ensure that the appliance voltage supply coincides with that indicated on the
appliance characteristics plate.
5.-The appliance must be connected to an earthed socket.
6.-Disconnection means must be incorporated into the fixed installation for the
disconnection of all poles from the mains, it must offer contact separation of at
least 3 mm on all poles.
7.-Ensure the site chosen to install the fan allows the blades to rotate freely. The
blades must be installed at a distance of at least 2.30 m. from the floor.
8.-If more than one fan is to be installed, ensure that blades from different fans
are not mixed, even though they are the same model.
9.-Each fan will be controlled by its control box. The control box cannot be used
to control by more than one fan.10.-Before starting to handle the electricity
supply, remove the fuses or disconnect the electrical supply mains switch.
11.-After installing the fan, ensure that it is correctly anchored to avoid the fan
falling.
12.-Never place objects between the blades while the fan is in movement.
25