Kinderkraft Vado Manual De Uso página 33

Tabla de contenido

Idiomas disponibles

Assembly in the vehicle in a rear way facing position (RWF):

Weight group 0+ for children weighing up to 13 kg

Weight group 1:

The seat must be fixed using the with ISOFIX fastenings and top tether. Read the instruction

manual of the vehicle manufacturer. Child in the seat is secured using the integrated harness.

Assembly in the vehicle in a front way facing position (FWF):

Weight group 1:

The seat must be fixed using the with ISOFIX fastenings and top tether. Read the instruction

manual of the vehicle manufacturer. Child in the seat is secured using the integrated harness.

Weight group 2:

The seat must be fixed using 3-point adult seat belts with additional ISOFIX attachments. Read

the instruction manual of the vehicle manufacturer. In the case of children in weight group 2

(15 kg to 25 kg), the safety harness in the car seat must be removed, and the child must be

fastened using the 3-point adult safety belt.

Attaching the seat

ECE

ISOFIX + Top Tether

strap

ISOFIX + Top Tether

strap

3-point seat belt of

the vehicle + ISOFIX

attachments

3. General safety

Please take a few minutes to read this manual to ensure proper safety of the child. Many

injuries are caused by reckless and inappropriate use of the seat and they are easy to avoid.

• DO NOT place the child seat in the seats fitted with an active frontal airbag, as it may be

dangerous. This does not apply to side airbags.

• In the case of placing the seat on the front seat, turn the airbag off. It is recommended to

use the seat in the back seats of the car only. Guidance on the suitability of the vehicle seat

for use with a car seat can be found in the instruction manual of the vehicle manufacturer.

• Suitable for installation only in the approved vehicles fitted with three-point safety belts

with retractor approved according to UN/ECE Regulation No. 16 or other equivalent

standards.

9 kg – 18 kg

15 kg - 25 kg

Orientatio