Assembly; Unpacking - Dirt Devil Matrixx Manual De Instrucciones

2 Assembly

2.1 Unpacking

2 Assembly
2.2 Assembly
2
3
1. Unpack the appliance and all its accessories.
2. Check the contents for completeness and possible
damage. Information regarding scope of delivery
Page 24, 'Overview of your Matrixx'.
ATTENTION:
Always transport/send the appliance in its original pack-
aging to avoid transport damage. Keep the packaging for
this purpose. Dispose of no longer needed packaging
material according to the applicable regulations of your
country.
NOTE:
Immediately contact your dealer if you have found dam-
age resulting from transport.
WARNING:
Danger of injury! Only assemble the appliance if it is not
connected to the power supply. It could be switched on
accidentally.
1. Insert the suction hose adapter powerfully into the in-
take opening of the vacuum cleaner (Fig. 2). When do-
ing so, ensure that the projections on the adapter en-
gage with the recesses of the intake opening (Fig. 2/
arrow).
You will hear and see the release catches of the suction
hose adapter snap into place (Fig. 3).
NOTE:
If the catches do not snap into place immediately, you
can turn the adapter this way and that until you hear and
see the release catches snap into place.
2. Check that the catches really have snapped into place
by pulling firmly in the opposite direction.
NOTE:
click! click! click!
Otherwise the suction hose might come off when vacu-
uming.
29