Possible Misuse - Hilti TE 30­-A36 Manual De Instrucciones

3 Description
3.1 Product overview
3.2 Intended use
The product described is a cordless (battery-powered) combihammer with pneumatic hammering mecha-
nism. It is designed for drilling in concrete, masonry, wood and metal. The product can also be used for light
to medium-duty chiseling on masonry and surface finishing work on concrete.
▶ Use only Hilti Li-ion batteries from the B 36 series with this product.
▶ Use only the Hilti battery chargers from the C4/36 series for these batteries.
3.3

Possible misuse

• This product is not suitable for working on hazardous materials.
• This product is not suitable for working in a damp environment.
3.4 Active Torque Control
The product has a mechanical slip clutch and an Active Torque Control (ATC) system.
This system offers additional convenience by rapid shutdown in response to sudden rotation of the rotary
hammer drill around the drill bit axis. This can happen, for example if the drill bit sticks due to hitting a rebar
or when the drill bit is tilted unintentionally.
Always choose a working position that allows the power tool when running in the forward direction to turn
freely counterclockwise (as seen from the user's point of view). When running in reverse, the tool reacts by
clockwise rotation. If rotational movement is not possible, the ATC system cannot react.
3.5 Motor protection system
The tool is equipped with a motor protection system. The system monitors current input and motor
temperature and thus prevents the tool from overheating.
If the motor is overloaded through application of excessive working pressure, the power tool's performance
drops noticeably or it may stall completely.
If the power tool stalls or slows significantly due to overloading, release the pressure applied to the tool and
then allow it to run under no load for approx. 30 seconds.
2173713
*2173713*
Printed: 07.06.2018 | Doc-Nr: PUB / 5351688 / 000 / 01
1
2
Chuck
@
Depth gauge release button
;
Depth gauge
=
Function selector switch
%
Forward / reverse switch
&
Control switch
(
Battery state of charge / fault display
)
Release buttons / battery state of charge
+
display
Battery
§
Side handle
/
English 5