Sony VPL-HW55ES Manual De Instrucciones página 47

Contrast
[CONTRAST]
Brightness
[BRIGHTNESS]
Color
Hue
Color Temp.
[COLOR TEMP]
Sharpness
[SHARPNESS]
Adjusts the contrast.
Higher values increase the sharpness in images, while lower values
decrease the sharpness.
You can make adjustments by pressing the CONTRAST +/– on the
remote control.
Adjusts the brightness of the picture.
The higher the setting, the brighter the picture. The lower the setting, the
darker the picture.
You can make adjustments by pressing the BRIGHTNESS +/– on the
remote control.
Adjusts the color density.
The higher the setting, the greater the intensity. The lower the setting, the
lower the intensity.
Adjusts the color tone.
The higher the setting, the more greenish the picture becomes. The lower
the setting, the more reddish the picture becomes.
Adjusts the color temperature.
D93: Equivalent to 9,300 K color temperature normally used in TVs.
Gives white colors a blue tint.
D75: Equivalent to 7,500 K color temperature used as an ancillary
standard illuminant.
Gives a neutral tint between "D93" and "D65."
D65: Equivalent to 6,500 K color temperature used as a standard
illuminant.
Gives white colors a red tint.
D55: Equivalent to 5,500 K color temperature used as an ancillary
standard illuminant.
Gives white colors an even redder tint.
Custom 1 to 5: Enables you to adjust, set, and store your favorite color
temperature. You can adjust Gain and Bias of RGB.
The factory default settings are as follows.
Custom 1: Same as "D93" color temperature setting.
Custom 2: Same as "D75" color temperature setting.
Custom 3: Same as "D65" color temperature setting.
Custom 4: Same as "D55" color temperature setting.
Custom 5: Setting that prioritizes brightness.
Sharpens the outline of the picture, or reduces the noise.
The higher the setting, the sharper the picture. The lower the setting, the
softer the picture, thus reducing the noise.
You can make adjustments by pressing the SHARPNESS +/– on the
remote control.
47
GB