Promax TV EXPLORER II Manual De Instrucciones página 193

USER'S MANUAL. TV EXPLORER II/II+
When pressing the cursor arrow
window again, in order to fix on screen this window the vertical cursors
be pressed up to select the OSD:OFF field, so press rotary selector [1] to switch to
OSD:ON.
Also the standard MPEG-2 profile is indicated which determines the compression
rate for the digital service decodified, the aspect ratio (4:3), the resolution (horizontal x
vertical) for received video and the picture refreshment frequency rate. In the (OSD:OFF)
mode the information window previously described will appear whenever the rotary
selector is pressed again [1].
When a digital channel is decodified, once the Table of Services SDT (Service
Description Table) acquisition is completed, is possible to accede to the list of
services contained in the Table.
For it place the field selector, by means of the vertical cursors
field of the active service (e.g. VTV 1 in the following figure) and later press the rotary
selector [1].
The DIGITAL SERVICES menu will appear then with the services available in the
digital Multiplex. Move the vertical cursors
and press it to select the service to visualise on screen.
DVB-T
DTV OSD: ON
(FREE)
MHP
Figure 61.- Digital channel monitoring. Digital services.
Also is possible to change the active service directly acting through the horizontal
cursors [6] key once has selected the field of the service from information window
of the currently tuned channel.
12/2013
[6] key will appear the tuning information
[6] key or turn the rotary selector [1]
CCIR CHANNEL:
F: 794.00 MHz DL:
DIGITAL SERVICES
VIDEO:
VTV 1
MPEG-2 2797 kb/s
MP@ML 720x576i 4:3 25Hz VTV 2
VPID: 111 TSID: 97
HI-TECH HD
AUDIO:
INFONEWS
MPEG-1 L-2 INFOSPORTS 192 kb/s
APID: 112 LANGUAGE:
(*)CanalIngenier
NETW.:
EXIT
12.9 E
VTV 1
NID: 12674 SID: 801
[6] key must
[6] key, on the
61
7940
en
Page 83