Promax TV EXPLORER II Manual De Instrucciones página 135

Explorador universal de tv
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

USER'S MANUAL. TV EXPLORER II/II+
Auto Power Off
Time Power Off
Terrestrial Units
Satellite Units
Rotary Selector
Ref. level
Transport Mode
Exit
Key number 8 to enter numeric data.
[23]
ANTENNA ALIGNMENT
Tool for faster sweep antenna alignment at terrestrial and satellite bands. Displays
the measurements by means of a graph level bar.
Key number 9 to enter numeric data.
[24]
TUNING BY CHANNEL OR FREQUENCY
Switches tuning mode between channel and frequency. In channel mode the
tuning frequency is defined by the active channels table (CCIR, ...).
Key number 0 to enter numeric data.
[25]
AUTO ID/ EXPLORER
Activates the automatic identification function (short pulsation):
The instrument will try to identify the signal under test.
First it recognises whether the signal is an analogue channel or a digital one.
12/2013
Activates the automatic power off mode.
Select the power off timeout from 1 to 120 minutes.
Select the measurements units for terrestrial and cable:
dBμV, dBmV or dBm.
Select the measurements units for satellite: dBμV, dBmV
or dBm.
Select the movement sense: CW (clockwise) or CCW
(counterclockwise).
It selects the most suitable range when accessing to the
spectrum analyser mode: MANUAL (defined by the user)
or AUTO (calculated by the instrument).
It activates or it deactivates the automatic power off
function for transportation. So, it allows to prevent an
accidental start-up of the equipment.
Exit from preferences menu.
Page 25

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Tv explorer ii +

Tabla de contenido