Fein DSk658-1 Manual De Instrucciones página 14

3 41 01 095 06 0.book Seite 14 Mittwoch, 18. November 2015 1:46 13
en
14
Original Instructions for Drill.
Symbols, abbreviations and terms used.
Symbol, character Explanation
Do not touch the rotating parts of
the power tool.
Make sure to read the enclosed
documents such as the Instruction
Manual and the General Safety
Instructions.
Before commencing this working
step, pull the mains plug out of the
socket. Otherwise there will be
danger of injury if the power tool
should start unintentionally.
Use eye-protection during opera-
tion.
Use ear protection during opera-
tion.
This sign indicates a possible dan-
WARNING
gerous situation that could cause
severe or fatal injury.
Confirms the conformity of the
power tool with the directives of
the European Community.
Worn out power tools and other
electrotechnical and electrical
products should be sorted sepa-
rately for environment-friendly
recycling.
Product with double or rein-
forced insulation
Ø Diameter of a round part
Symbol, character Explanation
1st gear/2nd gear/3. gear/4. gear
3.
Drilling diameter, steel
Fe
Drilling diameter, aluminium
Al
Drilling diameter, wood
Tap
Diameter for reaming
d = Clamping range of drill
1
chuck
d = Shank size of drilling shaft
2
d = Collar diameter
3
MT Morse Taper size (ISO 296)
Weight according to
EPTA-Procedure 01
Low speed
High speed