Publicidad
Idiomas disponibles
Idiomas disponibles
How it works
2
Charging control light
The induction loop fastener makes it easy to put on the device and minimizes the risk
of accidents.
Use the ON/OFF switch on the back of the receiver to switch it off and on.
Important: Always make sure to switch the receiver off when you've finished using it.
Otherwise, the battery will run down.
You will recognize the dummy because it has no metal contact surfaces.
When you first charge the battery packs for the
headset receiver let them charge for at least
14 hours. Only use original battery packs.
The package includes two battery packs and one
dummy.
Induction loop fastener
3.5 mm stereo jack
Dummy
English 13
Publicidad
