Symptom
Receiver doesn't work.
No audio signals being
received.
The audio transmission is
of poor quality, noisy,
distorted, unclear or no
audio signals being recei-
ved.
Battery pack no longer
gives the expected opera-
ting time per charge.
Cause
The receiver is not
switched on.
No battery is inserted into
the receiver.
Battery is discharged
The "line of sight" bet-
ween your transmitter and
receiver is obstructed or
you are too far
away with your receiver
from the transmitter.
Battery is discharged.
The system as used with a
Plasma TV.
Battery pack has
reached its recharging
limit.
Solution
Use the ON/OFF switch on
the back of the receiver to
switch the device on.
Insert a battery into the
receiver.
Replace battery with a
fully charged one.
Make sure that the front
side of the transmitter is
not obstructed and that it
is a free "line of sight"
transmission possibility.
Make sure you are not
located too far away from
your transmitter.
Replace battery with a
fully charged one.
Plasma TV's disturb the
infrared transmission.
Please use one of our FM
TV listening system.
Replace battery pack with
a new one.
English 19