Automatic Filter Cleaning - Fein Turbo II X Instrucciones De Uso

OBJ_BUCH-0000000234-002.book Page 19 Tuesday, August 1, 2017 8:47 AM
Wet vacuuming (figure 12).
When wet vacuuming electrically-conductive
liquids, the vacuum cleaner is automatically
switched off after reaching the maximum fill-
ing height (automatic shut-off). Pull the mains
plug from the socket outlet and empty the
container.
When wet vacuuming electrically non-con-
ductive liquids, the vacuum cleaner is not
automatically switched off after reaching the
maximum filling height. Empty the container
in time.
When foam comes out of the vacuum
cleaner, switch the vacuum cleaner off imme-
diately and empty the container.
After completion of the wet vacuuming, clean
the sensors and their intermediate area using
a brush (see figure 16).

Automatic filter cleaning

(Turbo II X AC/Turbo II X AC HEPA)
(figure 13).
The AC function "(automatic filter cleaning) "
is factory set, meaning, the flat-fold filter is
automatically cleaned every 15 seconds
through several air blasts.
When vacuuming wet debris or when primar-
ily vacuuming water, we recommend switch-
ing off the AC function "(automatic filter
cleaning)".
Fig. 12
Fig. 13
1.
2.
3.
en
19