Selecting 12H/24H Time Display (Clk Mode); Setting The Time (Clk Set); Changing Volume Presettings; Adjusting Power-On Volume (On Vol/Last Vol) - Blaupunkt Hamburg MP68 Instrucciones De Manejo

Ocultar thumbs Ver también para Hamburg MP68:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

User settings
Switch between the settings with the
u
rocker switch or
"OFF CLK"
"OFF CLK"
Press the OK button
u
ferent function, or press the DIS•ESC
;
button
to exit the menu.
Selecting 12h/24h time display
(CLK MODE )
The time can be displayed using the 12-hour
or 24-hour format.
In the System menu, press the rocker
u
:
switch
or
"CLK MODE" menu item is selected.
Press the OK button
u
menu item.
Use the rocker switch
u
lect the setting "12 HR AM", "12 HR PM"
or "24 HR MODE".
Press the rocker switch
u
on the selected setting.
Press the OK button
u
ferent function, or press the DIS/ESC
;
button
to exit the menu.

Setting the time (CLK SET)

In the System menu, press the rocker
u
:
switch
or
"CLK SET" menu item is selected.
Press the OK button
u
menu item.
The time is displayed.
Select the hours or minutes with the
u
rocker switch or
54
:
.
: Time display is on.
: Time display is off.
2
to select a dif-
repeatedly until the
2
to call up the
:
or
to se-
:
to switch
2
to select a dif-
repeatedly until the
2
to call up the
:
.
Enter the desired digit by pressing the
u
corresponding button of the keys
After entering the complete time,
press the OK button
u
time entered.
Note:
To fi nish the entry without changing the
time, press the DIS•ESC button

Changing volume presettings

The following presettings can be changed in
the System menu:
Power-on volume (ON VOL)
Volume presettings of telephone/nav-
igation announcement (TEL VOL) and
volume reduction (MUTE VOL)
Signal tone (BEEP ON)
Speed-dependent volume increase
(AUTO SND)
Adjusting power-on volume (ON VOL /
LAST VOL )
To adjust the power-on volume,
in the System menu, press the rocker
u
:
switch
or
"ON VOL" menu item is selected.
Press the OK button
u
menu item.
The current power-on volume is displayed.
Set the power-on volume with the rock-
u
:
er switch or
Press the OK button
u
ferent function, or press the DIS•ESC
;
button
to exit the menu.
9
.
2
to store the
;
.
repeatedly until the
2
to call up the
.
2
to select a dif-

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

7 648 012 310

Tabla de contenido