Press the rocker switch or
u
change the frequency in small incre-
ments.
Note:
You can also activate the "SEEK" func-
tion by using the rocker switch
open the "Tune" menu and pressing the
2
OK button
.
Selecting stored stations
Select the desired waveband or mem-
u
ory bank.
Press one of the station buttons
u
9
0 - 9
.
Or in the List menu:
Press the rocker switch
u
select a frequency from the list.
Press the OK button
u
The stored station is called up, provided
that it can be received at the current vehi-
cle position.
The frequency of the station appears on the
external display.
Storing stations
There are 2 ways of storing a station:
•
Storing stations manually
•
Searching and storing stations automat-
ically (Travelstore)
:
to
:
to
:
or
to
2
.
Storing stations manually
After tuning into a station, it can be stored
as follows:
Press one of the station buttons 0 - 9
u
for approx. 2 seconds to which you want
to assign the station.
Or in the List menu:
Press the rocker switch
u
select a memory location in the list.
Press and hold down the OK button
u
for approx. 2 seconds.
The list displays the frequency at the se-
lected memory location. The station was
stored.
Searching and storing stations
automatically (TRAVEL STORE)
You can automatically search for and store
the 10 FM or AM stations offering the
strongest reception in the region in the FMT
or AMT memory bank. Stations that were
previously stored in the FMT or AMT memo-
ry bank are automatically deleted.
Select the desired FM or AM waveband.
u
Press the rocker switch
u
the "Tune" menu.
The "SEEK" function is selected.
Press the rocker switch
u
select the "T-STORE" function.
"TRAVEL STORE" appears on the display.
Press the OK button
u
The tuner starts with the automatic seek
tuning. After the storing is completed, the
radio plays the station at memory location 1
of the FMT or AMT level.
Tuner mode
9
:
or
to
2
:
to open
:
or
to
2
.
21