Hazard Information; Safety Information - Graf Biomatic Instrucciones De Montaje

2.

Safety Information

This chapter provides you with information about safety measures and residual risks. In order to ensure
safe-as-possible work with the plant, please read through this chapter thoroughly before you begin work-
ing with the plant.
2.1 Declaration of Warning Information and Prohibitions
Hazard warning
Warning: Risk of falling
Warning Injury to hands
Warning: explosive atmospheres
Naked flame, light and smoking prohibited
2.2

Hazard Information

1st For safety reasons, all persons who come into immediate contact with the plant must have read and
understood the content of this documentation.
2nd This system must not be used for a different purpose to the one described by the manufacturer.
3rd Local working and safety regulations and rules must be followed at all times even if these are not
mentioned specifically in this manual. The same also applies to environmental regulations.
4th When discovering faults or risks, the Owner/operator must inform the manufacturer or responsible
service company right away.
5th Safety precautions must never be removed or circumvented during normal operation of the plant.
Safety precautions must only be allowed to be circumvented or disabled by the maintenance techni-
cian during maintenance and repair work.
6th When working with chemical agents, avoid [physical] contact with the chemicals are much as possi-
ble. Before working with these substances read and follow the instructions in the usage guide,
7th If personal protective equipment (safety boots, protective goggles, gloves, hearing protection, etc.) is
required, you must ensure that they are also used. Any faulty or damaged protective equipment must
be replaced with fully-functional equipment right away.
8th All safety and hazard notices on the machine must be kept in a legible condition at all times.
2. Safety Information
37 / 96