Fitting The Trimmer Guard And Trimmer Head; Fitting The Transport Guard - McCulloch B40 P ELITE Manual De Instrucciones

Fitting the trimmer guard and trimmer
head
• Fit the correct trimmer guard (A) for use with the
trimmer head.
C
A
• Hook the trimmer guard/combination guard onto the
fitting on the shaft and secure with the bolt (L).
• Fit the drive disc (B) on the output shaft.
H
C
A
• Turn the output shaft until one of the holes in the drive
disc aligns with the corresponding hole in the gear
housing.
• Insert the locking pin (C) in the hole to lock the shaft.
• Screw on the trimmer head/plastic blades (H)
anticlockwise.
ASSEMBLY
L
A
B
B
• To dismantle, follow the instructions in the reverse
order.

Fitting the transport guard

Attach the transport cover on the blade as shown.
–
English 13