Technical Specifications - Velleman VLE4 Manual Del Usuario

• Press the discharge button [5] within 1 minute after connecting the
charger to the mains. After 1 minute of charging, the button is
disabled automatically.
• The word DISCHARGE is shown and the battery icons will flash
until all batteries are discharged.
• When discharging is completed, charging starts automatically.
USB port
• When no batteries are present inside the charger or all inserted
batteries are fully charged, the USB port [7] becomes available. The
USB available icon [B] is shown.
• Make sure the load connected to the USB port does not exceed
500mA.
7.

Technical specifications

input voltage
mains adaptor
AA/C/D
AAA
output
9V
USB
discharge current
number of channels
dimensions
weight
Use this device with original accessories only. Velleman nv
cannot be held responsible in the event of damage or injury
resulted from (incorrect) use of this device. For more info
concerning this product and the latest version of this user
manual, please visit our website www.velleman.eu. The
information in this manual is subject to change without prior
notice.
18.03.2010
VLE4
12VDC / 1000mA (mains adaptor incl.)
100-240VAC / 50-60Hz
1300mA charging current
500mA charging current
30mA
5VDC - 500mA
400mA (AA/AAA/C/D)
4
127 x 172 x 65mm
±420g
7
©Velleman nv