Technical Specifications - Velleman SOL12 Manual Del Usuario

3. Use
a. Charging Your Mobile Phone
• Open the solar charger and align facing the sun for maximum sun exposure.
The green LED will flash.
• Insert 5 x AAA-size batteries in the battery compartment. We recommend
using NiMH or Li-ion rechargeable batteries. The red LED will indicate fully
charged batteries.
• Connect your mobile phone to the solar charger using the connection wire
and the appropriate adapter. Insert the connection wire in the battery output.
The green LED will again flash. Disconnect your mobile phone from the
solar charger after 30 minutes of charging, even when your mobile
phone is still in charging process.
b. Charging An Electronic Device
• Connect your device (CD player, digital camera, MP3 of 6V or less) to the
solar charger using the connection wire and the appropriate adapter. Insert
the connection wire in the solar output to power through solar energy or in
the battery output to power through the batteries.
Do not charge your mobile phone through the solar output.
Doing so will only drain your mobile phone battery.
Disconnect your device from the solar charger or take out the
batteries when the red battery full LED switches on.
This solar charger is not waterproof. Keep away from rain and
humidity.
Keep the solar cells clean with a soft cloth.

4. Technical Specifications

Power
Output Voltage
Peak Charging Current
Dimensions
Solar Panel Dimensions
Solar Cells
Wire Length
Weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the event of
damage or injury resulted from (incorrect) use of this device. For more info concerning this product,
please visit our website www.velleman.eu. The information in this manual is subject to change without
prior notice.
1W (SOL12) or 2W (SOL13)
7 ~ 8V
110mA (SOL12) or 220mA (SOL13)
168 x 108 x 28mm
147 x 71mm
thin-film (SOL12) or crystalline (SOL13)
± 1m
400g