Features; Assembly - RIDGID R82008 Manual Del Operador

Taladro de 10 mm (3/8 pulg.)12 v de iones
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SYMbOLS
wARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes, which can result
in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses
with side shields and, when needed, a full face shield. We recommend Wide Vision Safety Mask for use
over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked
to comply with ANSI Z87.1.
wARNING:
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals
known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure
to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic particles.

FEATURES

PRODUCT SPECIFICATIONS
Chuck ...........................................................3/8 in. Keyless
Motor .................................................................. 12 Volt DC
Switch .............................. VSR (Variable Speed/Reversible)
No Load Speed ...................... 0-320 / 0-1300 r/min. (RPM)
Clutch ................................................................ 18 Position
Torque ................................................................... 240 in.lb.

ASSEMbLY

UNPACkING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
PACkING LIST
Drill
Tool Bag
Operator's Manual
Battery Packs (2)
Charger
SAVE THESE INSTRUCTIONS
6 - English
kNOw YOUR DRILL
See Figure 1, page 11.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating features and safety rules.
wARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Failure to
heed this warning could result in serious personal
injury.
wARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
wARNING:
To prevent accidental starting that could cause
serious personal injury, always remove the battery
pack from the product when assembling parts.

Publicidad

Tabla de contenido
loading

Tabla de contenido